In a well-ventilated area, fully cover the wood edges of both sets of the DIY Wood Frame with Wire and both sets of DIY Wood Frames with Galvanized Metal with silver metallic spray paint. Let dry.
Using a generous amount of hot glue, attach the vertical sides of each DIY Wood Frame with Wire together.
Cut one Optimus Prime, one Bumblebee and one Autobot symbol off of the plastic strings in the Transformers Swirl Decor kit. Attach them to the frames with hot glue.
Attach four of the silver Metal Watch Gears to a silver Bottlecap Charm with hot glue. Repeat this to make four total bottlecaps.
Attach the four metal gear bottlecaps to the top of the wood frame with hot glue.
Stand the frame upright on a table against a wall. Using hot glue, attach both wood frames with galvanized metal to each other side by side. Lay them flat on the table in front of the upright frames and secure the edges that touch the bottom of the upright frames with hot glue.
Inflate two of the Mini Inflatable Tires. These come in a pack of 12. Since you will only need two of them to make your game, you could inflate all of them and have 10 on hand to give away to your guests as prizes.
Turn the tires over and cover the bottom with masking tape.
Flip the tires over, tape-side down and attach each tire to the middle of each of the frames with metal. Finish the look of the game by placing Transformer toys on either side of the game.
Now you're ready to play! Using the Action Packed Kick Balls, each player takes a turn tossing three of the balls to get them inside the tire. The player who gets their ball into the tire wins a prize. Check out my Transformers Party for more details!
In a well-ventilated area, fully cover the wood edges of both sets of the DIY Wood Frame with Wire and both sets of DIY Wood Frames with Galvanized Metal with silver metallic spray paint. Let dry.
Using a generous amount of hot glue, attach the vertical sides of each DIY Wood Frame with Wire together.
Cut one Optimus Prime, one Bumblebee and one Autobot symbol off of the plastic strings in the Transformers Swirl Decor kit. Attach them to the frames with hot glue.
Attach four of the silver Metal Watch Gears to a silver Bottlecap Charm with hot glue. Repeat this to make four total bottlecaps.
Attach the four metal gear bottlecaps to the top of the wood frame with hot glue.
Stand the frame upright on a table against a wall. Using hot glue, attach both wood frames with galvanized metal to each other side by side. Lay them flat on the table in front of the upright frames and secure the edges that touch the bottom of the upright frames with hot glue.
Inflate two of the Mini Inflatable Tires. These come in a pack of 12. Since you will only need two of them to make your game, you could inflate all of them and have 10 on hand to give away to your guests as prizes.
Turn the tires over and cover the bottom with masking tape.
Flip the tires over, tape-side down and attach each tire to the middle of each of the frames with metal. Finish the look of the game by placing Transformer toys on either side of the game.
Now you're ready to play! Using the Action Packed Kick Balls, each player takes a turn tossing three of the balls to get them inside the tire. The player who gets their ball into the tire wins a prize. Check out my Transformers Party for more details!
