
Apply adhesive to the bottom of one of the wood squares, along the edges.

Center the wood square on the wood slat sign, and press down firmly, centering it squarely in the middle of the piece.

Attach two of the wood trays together with the adhesive, ensuring that the handle sides are facing out.

Apply adhesive to the underside where it will touch down onto the wood slat sign, then center on the right side of the surface. Press firmly to adhere.

Repeat this process for the opposite side, using two more of the wood trays.

Apply Power Tac to the bottom of one of the large galvanized buckets.

Flip the project over so that the bottom of the wood slat sign is facing up. Center the galvanized pail on the wood piece, and press down to adhere.
Repeat Steps 1-7 to create a second tier.

Adhere the top tier to the bottom tier, then top off the project with one final wood tray, as shown.

Adhere the miniature chalkboards to the outside corner of each tier, this way you can easily label what is placed above the chalkboard. In our case it’s tasty pies for our Wedding Pie Bar!



Your project is complete! Be sure to allow the adhesive to cure overnight for excellent hold. Next step: load it up with your delicious treats and goodies!
To get some more inspiration for your wedding pie bar, take a look at my Rustic Pie Bar Backdrop, Charming Cherry Pie Pops, Handstamped Wood Favor Box and my Luscious Lavender and Lemon Meringue Pie Recipe.

Apply adhesive to the bottom of one of the wood squares, along the edges.

Center the wood square on the wood slat sign, and press down firmly, centering it squarely in the middle of the piece.

Attach two of the wood trays together with the adhesive, ensuring that the handle sides are facing out.

Apply adhesive to the underside where it will touch down onto the wood slat sign, then center on the right side of the surface. Press firmly to adhere.

Repeat this process for the opposite side, using two more of the wood trays.

Apply Power Tac to the bottom of one of the large galvanized buckets.

Flip the project over so that the bottom of the wood slat sign is facing up. Center the galvanized pail on the wood piece, and press down to adhere.
Repeat Steps 1-7 to create a second tier.

Adhere the top tier to the bottom tier, then top off the project with one final wood tray, as shown.

Adhere the miniature chalkboards to the outside corner of each tier, this way you can easily label what is placed above the chalkboard. In our case it’s tasty pies for our Wedding Pie Bar!



Your project is complete! Be sure to allow the adhesive to cure overnight for excellent hold. Next step: load it up with your delicious treats and goodies!
To get some more inspiration for your wedding pie bar, take a look at my Rustic Pie Bar Backdrop, Charming Cherry Pie Pops, Handstamped Wood Favor Box and my Luscious Lavender and Lemon Meringue Pie Recipe.