Remove the protective film from the Clear Acrylic Sign. Position the Whiskey Bar template behind the sign. Using a white chalk sharpie or Marvy® Fine Point White Bistro Chalk Marker trace the sign onto the acrylic sign. Let it dry.
Alternatively, if you have a cutting machine (e.g. Cricut©), convert the PDF file into a JPG and cut the quote out of white vinyl. I used the Madina Script and Broadway fonts.
Download the free Whiskey Bar Signage here!
Next lay out two Buffalo Plaid Beverage Napkins flat. Overlap the napkins and line up the plaid, glue together along the overlap. You now have a large enough piece of plaid to fit the size of the acrylic sign.
Glue the napkins to the back of the acrylic.
Note: Ensure the glue is added to the red pattern side of the napkin, not the white side so that the red shows under the white writing.
Spray paint an Antler Table Tosser gold.
Create a mini bouquet of faux greenery, berries and thistles and tie to the gold antler with Black Tulle.
Next glue the antler bouquet to the top right corner of the acrylic sign.
On the day add fresh thistles to the bouquet and place the sign in the provided stand.
Next cut a length of Black Tulle and a length of plaid ribbon and tie around the end of an Antler Table topper.
Place the antler as a decorative accent in front of the Whiskey Bar sign. You are now ready to set up the Whiskey Bar.
For more ideas and inspiration be sure to check out my Tartan & Tulle Winter Wedding, DIY Plaid and Tulle Chair Backers and Warm Whiskey Wedding Cocktail.
Remove the protective film from the Clear Acrylic Sign. Position the Whiskey Bar template behind the sign. Using a white chalk sharpie or Marvy® Fine Point White Bistro Chalk Marker trace the sign onto the acrylic sign. Let it dry.
Alternatively, if you have a cutting machine (e.g. Cricut©), convert the PDF file into a JPG and cut the quote out of white vinyl. I used the Madina Script and Broadway fonts.
Download the free Whiskey Bar Signage here!
Next lay out two Buffalo Plaid Beverage Napkins flat. Overlap the napkins and line up the plaid, glue together along the overlap. You now have a large enough piece of plaid to fit the size of the acrylic sign.
Glue the napkins to the back of the acrylic.
Note: Ensure the glue is added to the red pattern side of the napkin, not the white side so that the red shows under the white writing.
Spray paint an Antler Table Tosser gold.
Create a mini bouquet of faux greenery, berries and thistles and tie to the gold antler with Black Tulle.
Next glue the antler bouquet to the top right corner of the acrylic sign.
On the day add fresh thistles to the bouquet and place the sign in the provided stand.
Next cut a length of Black Tulle and a length of plaid ribbon and tie around the end of an Antler Table topper.
Place the antler as a decorative accent in front of the Whiskey Bar sign. You are now ready to set up the Whiskey Bar.
For more ideas and inspiration be sure to check out my Tartan & Tulle Winter Wedding, DIY Plaid and Tulle Chair Backers and Warm Whiskey Wedding Cocktail.
