
Paint the DIY Flower Box all white. If you want to see the wood grain through the paint, you can just use one coat of paint. If you want a bright white, modern look like I have here, you will need two coats of paint. You don’t have to paint the inside of the box, but you should paint the inside about 2″ down. Let dry completely.



Once the box is fully dry, place the Mercury Votive Holders inside the box. Place the taller one in the middle and the other two shorter holders on either side of it.

Fill the box with packing material. I used all the packing material that came with the supplies I used for this project.



Place hot glue along the rim of the tallest votive holder and put a Medium Boxwood Décor Ball on top. Hold in place for a minute to allow it to dry. Place hot glue along the rim of the other two votive holders and put a Small Grass Ball on top of each and hold in place until dry.





Place two Small Grass Balls and two Faux Succulent Picks on the left side of the first votive holder (as shown). Do the same thing on the right side of the third votive holder.



Put the remaining two Faux Succulent Picks in the center front of the box.



Fill in the open areas with Bag of Moss Rocks until you can’t see the packing material in the box.

Now you’re ready to display your centerpiece. For this Pantone Color of the Year Greenery Wedding, these centerpieces went perfectly with the decor!

I made two of these DIY Greenery Centerpieces and placed them on the Pantone Greenery Head Table.
Want more Pantone Color of the Year Wedding ideas? Check out the Pantone Color of the Year Greenery Wedding Head Table, Greenery Dessert Table, DIY Greenery Chandelier, Greenery Wedding CenterpieceDIY Greenery Wreath and Greenery Cocktail recipe.

Paint the DIY Flower Box all white. If you want to see the wood grain through the paint, you can just use one coat of paint. If you want a bright white, modern look like I have here, you will need two coats of paint. You don’t have to paint the inside of the box, but you should paint the inside about 2″ down. Let dry completely.



Once the box is fully dry, place the Mercury Votive Holders inside the box. Place the taller one in the middle and the other two shorter holders on either side of it.

Fill the box with packing material. I used all the packing material that came with the supplies I used for this project.



Place hot glue along the rim of the tallest votive holder and put a Medium Boxwood Décor Ball on top. Hold in place for a minute to allow it to dry. Place hot glue along the rim of the other two votive holders and put a Small Grass Ball on top of each and hold in place until dry.





Place two Small Grass Balls and two Faux Succulent Picks on the left side of the first votive holder (as shown). Do the same thing on the right side of the third votive holder.



Put the remaining two Faux Succulent Picks in the center front of the box.



Fill in the open areas with Bag of Moss Rocks until you can’t see the packing material in the box.

Now you’re ready to display your centerpiece. For this Pantone Color of the Year Greenery Wedding, these centerpieces went perfectly with the decor!

I made two of these DIY Greenery Centerpieces and placed them on the Pantone Greenery Head Table.
Want more Pantone Color of the Year Wedding ideas? Check out the Pantone Color of the Year Greenery Wedding Head Table, Greenery Dessert Table, DIY Greenery Chandelier, Greenery Wedding CenterpieceDIY Greenery Wreath and Greenery Cocktail recipe.